When We Install the Toilet, What Steps and Details Should We Pay Attention To?

If many toilets fail in daily use, the big reason may be improper operation at the time of installation. Improper installation will result in a poor user experience of the toilet, or even fail to perform as it should. Based on years of experience, MWD has sorted out the steps and details that need to be paid attention to when installing a toilet.

1. Before installing the toilet, check whether the drainage pipe of the sewer is unobstructed, and then check whether the installation position of the toilet is horizontal. If the position is not horizontal, it needs to be leveled during installation. In addition, the sewer pipe mouth will generally have a large section, and the excess can be cut short, as long as it is set aside 3mm above the ground.

2. After the inspection, make a mark on the sewage pipe and the sewer pipe, determine the installation position, use an electric drill to punch a hole on it, and then bury the expansion screw. Then put a seal on the sewage outlet of the toilet, and apply glue to the sewage pipe to ensure that the sewage does not penetrate.

3. After installing the parts and accessories of the toilet, you need to open the water valve to see if the connection between it and the water pipe of the toilet is normal, whether there will be an insufficient length, and so on.

4. The toilet is basically installed, but we still need to debug the toilet to check whether the drainpipe is smooth, whether it will be blocked, and whether its water pumping is normal. If problems are found during the inspection, you can follow the installation instructions to handle them.

5. The sewage pipe of the toilet should use the material required by the national standard. The inner wall of the pipe is smooth, flat, and free of cracks. Its inner pipe is equipped with an odor-proof water seal, so there is no need to set a water bend on the sewage pipe, so as not to affect the flushing function.

5. When applying glue or mortar to the bottom of the toilet, the ratio of cement and sand is 1:3, and the ground must be kept level. After installation, be sure to connect the water source to see if the water inflow and sealing are normal, and whether the drainage and installation positions correspond to each other, and whether there will be leakage.

In addition to the above items that we need to pay attention to during installation, we also need to buy ceramic toilets with good workmanship to ensure future use. If you need this, you can find a lot of related product information on MWD's website.

As an experienced toilet and accessories manufacturer, our products are sold all over the world and have received high praise and trust from many customers. We have a professional production team and strict inspection system, which can control the quality of products in all aspects. At the same time, we can also provide users with comprehensive customized services. If you want to buy our toilet, please contact us immediately!