When Choosing a Toilet, What Problems Should We Pay Attention To?

Many users do not know how to choose the right toilet and accessories when decorating their homes, which leads to a lot of trouble in the subsequent use process. If we can take into account the following considerations, we can choose the right toilet.

(1) Measure the pit distance of your own home, that is, the distance between the center of the toilet drain and the wall (the tiled surface), and choose the toilet when the pit distance is determined (some toilet models cannot meet all the pit distance requirements).

(2) Confirm wall drain, ground drain, or same-layer drainage: wall drain means that the sewage outlet is on the wall, and ground drain means that the sewage outlet is on the ground. The same-layer drainage means that the floor slab of the bathroom area is lowered by 300-350mm, which can facilitate the layout of the sewer pipes.

Both the floor drain and the same floor drain can choose the floor drain toilet, and the wall drain must choose the wall drain toilet. At present, most of them are ground drainage.

Generally speaking, products with higher gloss have higher compactness and are easier to clean and hygienic. The higher the firing temperature, the more uniform the porcelain will be, and the quality of the porcelain will directly affect the life of the toilet.

Consumers can ask the merchant whether the sewage outlet is glazed when making a purchase, or even reach into the sewage outlet to see if the backwater bay is glazed. If the glaze is poor, it is easy to stain when used, and the qualified glaze must feel delicate to the touch.

Consumers can also touch the corners of the glazed surface to see how thin the glaze is. If the corners are uneven or exposed and feel rough to the touch, the glaze is very thin.

The way the toilet flushes will directly affect its cleanliness. Nowadays, the toilet generally adopts two methods, direct flushing and siphoning.

The flush toilet uses the gravity of the flushing water to push the dirt out of the toilet trap to achieve sewage discharge. The advantage is that it has a strong sewage discharge capacity; while the siphon toilet uses the toilet sewage pipe during flushing. The siphon force generated in the toilet can suck the dirt out of the toilet trap to achieve the purpose of sewage discharge. Therefore, splashing can be better avoided when flushing and the flushing effect of the cylinder is cleaners.

There are two ways to save toilet water, one is to reduce water consumption, and the other is to save water by reusing wastewater. Water-saving toilets have the same functions as ordinary toilets and must have the functions of saving water, maintaining washing functions, and conveying excrement.

The high-temperature-fired toilet has a low water absorption rate, so it is not easy to suck in sewage and produce a peculiar smell. Some low- and medium-grade toilets have a high water absorption rate. When sewage is sucked in, it is easy to emit an unpleasant smell and is difficult to clean. Over time, cracks and water leakage will occur.

When selecting, you can tap the toilet lightly with your hands. If the tapping sound is hoarse, not clear, and loud, then such a toilet is likely to have internal cracks or the product is not cooked.

There are many reasons for toilet splashing, such as the structure of the toilet, the height of the stool, the angle of the water, and the physical condition of the user. Therefore, if you want to choose a toilet that is not prone to splashing, it is best to choose a product with a water seal height between 55 and 60 mm.

Toilet accessories determine the main service life or maintenance convenience of the toilet. The toilet accessories are mainly distributed in the water tank. If you find that it is light and fluttering when pressed, it means that the elasticity of this button is very poor, and it is easy to lose its elasticity later, resulting in no water rushing out after pressing it.

Good accessories will give people a sense of thickness, and pressing the flush button obviously feels full of flexibility. In addition, if the quality of the gaskets and links are poor, the toilet is prone to scaling and clogging, and it is also prone to leaking water and returning odor. The gasket should be made of rubber or foamed plastic, with relatively large elasticity and good sealing performance.

MWD strictly controls the quality and flushing function of the products. We provide a variety of types and specifications of products to meet the diverse needs of users. If you are interested in our products, you can send us your needs, and we will provide you with a satisfactory answer in time.

With professional manufacturing technology and excellent production technology, we have quickly become one of the leading toilet and accessories manufacturers. Our many years of experience and thoughtful service have won praise and trust from customers all over the world. We have a comprehensive quality inspection system and a comprehensive management team to control the process and details of the product in an all-around way. At the same time, we can also provide customized services in place according to the actual needs of customers. If you want to buy our toilet, please contact us immediately!