What Are the Installation Steps for Wall Hung Toilets?

What Are the Installation Steps for Wall Hung Toilets?

Summary

The wall-hung toilet can hide the drainage pipe and the water tank, so the installation method is different from the ordinary toilet. Let’s talk about the specific installation steps of the wall-hung toilet.

What Are the Installation Steps for Wall Hung Toilets?
 some suggestions on how to keep the toilet clean

The wall-hung toilet is different from ordinary toilets in that it can hide the drainage pipes, toilet tanks, and other accessories, making our bathroom space look neater. Then by understanding the following steps to install a wall-hung toilet, we can reduce the phenomenon of failure due to improper installation.

Determine the height of the water tank

If it is a top-press water tank, and the thickness of the decorative layer is x cm, the height from the top of the bracket to the bottom of the adjustable feet is 82+xcm; if it is a side-press water tank, the height from the top of the bracket to the bottom of the adjustable feet is 100cm+xcm; the bracket adjustment foot can only be adjusted to 20cm at most, without special lengthening.

Fixing screw

The water tank bracket of the wall-hung toilet is mainly fixed by 4 screws, two on the upper part of the bracket and two on the supporting feet. All the screws must be fastened. When installing, ensure that the surface of the water tank bracket is horizontal and the vertical surface is vertical.

Connect the water supply pipe

The indoor water supply pipe is connected with the water tank water inlet angle valve. It is strictly forbidden to install the matching angle valve in the water tank outside the tank body to avoid trouble cleaning and maintenance of the water tank, and it is impossible to open and close the angle valve.

Install drain pipe

The drain pipe is a part of the toilet that must be installed. If the concealed water tank is installed in the original pit, the short pipe connecting the water tank and the drain pipe must be larger than Φ90 to avoid blockage.

Install a protective device

The installation of the protective device must be carried out before the false wall is made and the decorative layer is installed. The screw protection hose is installed, divided into two parts, and the parts are sleeved at the front and rear ends of the screw to prevent the false wall or the decorative layer from blocking the screw hole.

Make a fake wall

1. Red brick wall

Seal the edges and gaps of the water tank with red bricks, and build a red brick wall of about 50mm in front of the water tank. Reserve the water tank protection frame, flushing pipe, drain pipe, and screw position. The editor reminds you that the thickness of the red brick should be suitable, the minimum thickness is about 50mm.

2. Light steel keel + moisture-proof gypsum board

When installing the light steel keel, it must be flat with the water tank bracket, and the gypsum board must be close to the surface of the bracket and fixed to avoid the phenomenon of cracking of the decorative material during use.

3. Gray brick + steel wire mesh

Use bricks at the edges and gaps of the water tank bracket to keep it level with the surface of the bracket. Use a steel wire mesh slightly larger than the bracket to seal the water tank bracket as a whole, and fix the steel wire mesh on the brick wall. Two layers of steel wire mesh can be sealed if necessary.

Install the toilet

After the false wall is installed, stick the sound insulation pad on the decorative wall, measure and cut the pipe, and install the toilet according to the position of the screw. When installing a wall-hung toilet, pay attention to adjusting the horizontal position of the toilet, and cut off the excess sound insulation pad after completion.

We need to strictly follow these installation steps to prevent the wall-hung toilet from malfunctioning in future use. If after reading the above, you feel that the above installation steps are not very effective for you, you can contact MWD for a more comprehensive solution.

With excellent production technology and high-quality products, we have quickly become one of the leading toilet and accessories manufacturers. We choose high-quality materials and exquisite craftsmanship, which can guarantee the product performance and service period to the greatest extent. Our thoughtful one-stop service has also received praise and trust from many customers. If you want to know about our products, please don't hesitate to contact us immediately!