How to Install the Wash Basin Sink Correctly?

How to Install the Wash Basin Sink Correctly?

Summary

Washbasin sink and toilet are both indispensable sanitary products, and the correct installation of them is conducive to our future use. This article will specifically introduce the correct installation of the washbasin sink.

How to Install the Wash Basin Sink Correctly?
the correct installation of the washbasin sink
The use of washbasin sink is very frequent in our daily use, so it is very important to install it reasonably and correctly. As long as we can install the washbasin sink according to the following steps, we can reduce the probability of failure in the future.

1. Check if the product is damaged

Please be sure to unpack the washbasin sink immediately after delivery. Check for any damage or malfunctions, because it is better to find them now, not during the installation process.

2. Prepare tools

(1) Adjustable wrench

(2) Adjustable pipe wrench

(3) Pencil

(4) Sealant gun

(5) Spirit level

(6) Standard screwdriver

(7) Tape measure

3. Fix position

Before installing the sink, you must first determine the location and size of the installation, so that we can order according to the size. It is best to have a planned view of the sink to avoid inaccurate data and cause rework.

4. Install faucet and inlet pipe

Before installing the sink, you should install the faucet and the water inlet pipe first, and the water inlet pipe at the other end needs to be connected to the water inlet switch.

5. Put the sink into the countertop

After the sink is placed on the countertop, it is necessary to install matching pendants between the wall and the countertop. Pay attention to the sealing effect of the sink as much as possible during the installation process.

6. Install supporting pendants

Installing the accessory pendant is generally regarded as the last step of sink installation. Generally, workers will cut the cabinet countertop according to the size of the sink only after the sink is bought home. After putting it on the countertop, the accessory should be installed. During installation, every gap should be filled to avoid water leakage in the future.

7. Drainage acceptance

After the entire sink is installed, fill the sink with water and do a drainage test. If there is leakage, the problem should be found immediately and reworked and repaired.

8. Edge banding

After the drainage test ensures that there is no problem, the water tank can be sealed. When using silica gel to seal the edge, make sure that the gap between the sink and the countertop is even, and no water seepage occurs.

9. Clean up

After the installation is complete, the sink must be cleaned to clean up the debris during installation. Never flush water directly into the sewage, it is easy to cause blockage.

There are also many types of washbasin sinks, and different types of washbasin sinks have some differences in installation. If you want to know specific information in this regard, please contact MWD to seek a comprehensive solution.

As a professional sanitary ware manufacturer, we specialize in the production and export of sanitary ceramic sanitary ware, namely toilets and basins. We have rich experience in fine production management, strict quality control, and thoughtful after-sales service. And we can also provide professional customized services according to the diverse needs of customers. If you want to buy our wash basin sink, please contact us immediately!