3 Common Faults and Solutions for Wall Hung Toilets
- Share
- Issue Time
- Sep 27,2021
Summary
When the wall-hung toilet fails, we need to find out the cause and repair it in time. This article will specifically introduce the common faults and solutions of wall hung toilets.
The wall-hung toilet is a bathroom product that has been very popular among modern families in recent years. Because of its unique wall-hung design, it looks clean and beautiful. However, because the water tank is hidden in the wall, it may be more complicated to deal with failures. The followings are common faults and solutions for wall-hung toilets.
The toilet is loose
When you sit on a wall-hung toilet, you may feel that the toilet is loose or even shaking. This may be because the toilet was not installed correctly at the beginning. Once you find this problem, you must solve it as soon as possible.
Otherwise, it may lead to the increase of other problems. For example, there are more bacteria in the toilet. If the problem of the loose toilet bowl is not solved, the water inside may leak and spread harmful bacteria.
To solve this problem, you must reinstall the toilet. If you are experienced in this area, you can reinstall it yourself. If you are not sure whether you can reinstall it correctly, you can contact professional staff to reinstall and fix the wall-hung toilet.
Continuous running water after rinsing
If you keep hearing the water flowing after flushing the toilet, it will cause a lot of trouble. First, this wastes a lot of water. Secondly, this will affect your toilet flushing, because it cannot store enough water to flush.
You need to make some simple adjustments to the ball valve and float firstly, or replace it to solve the problem!
You must remove the water tank cap first. Take a screwdriver to adjust the float valve and loosen it and adjust the height until you see the water flow stops, then tighten it again! If adjusting the float valve does not solve your problem, you must remove it and replace it!
Water seeps into the wall
Sometimes you will notice that water seeps into the wall when flushing. This is usually caused by poor pipe connections or internal leakage.
Turn off the water supply to the toilet first. If the toilet is relatively loose, tighten the bolts of the toilet.
Check for cracks through the color drops in the toilet. Just drop a few drops in the water tank and the color will gather on the cracks. If the toilet is cracked, it must be replaced with a new one in time.
Second, you can check whether the connection in the water supply pipeline is loose. If so, tighten the pipe with a wrench to stop the leak.
Finally, if the leak persists, maybe because the wax seal under the toilet has been damaged. You need to remove the bolt that connects the toilet to the wall. Then use a putty knife to scrape off the old wax ring on the drain pipe. Then pick up the new wax ring and place it on the opening of the drain pipe.
The wall-hung toilet designed and manufactured by MWD is beautiful in design, excellent in performance, and easy to install and maintain. If you want to know more about wall-hung toilets after reading the above, you can get a comprehensive solution by contacting us.
With excellent technology and considerate service, we have become one of the leading toilet and accessories manufacturers. Our professional production team designs and produces products in strict accordance with standards, and also controls their quality in all aspects. At the same time, we can also provide thoughtful one-stop service and formulate effective solutions according to customer needs. If you want to buy our high-quality wall-hung toilets, please contact us immediately!