Steps and Precautions for Removing the Toilet

If the bathroom toilet has a serious failure due to long-term use, it must be removed correctly in order to repair the toilet or replace it with a new one. If the toilet is not removed correctly, it will not only cause damage to the old toilet but also damage the structure of the household water pipe. The followings are the steps and precautions for removing the toilet.

1. First check the old wc toilet for cracks. Please pay special attention to the place where you want to lift the toilet. Because the toilet is made of ceramics, it is easy to cut your hands, so you should wear thick work gloves when moving the toilet.

2. Remove the water tank cover, and take the cover to a place where it will not be touched.

3. Turn off the water source, the position of the water valve is on the left side of the toilet.

4. Wash away the water in the water tank, press the flush handle and don't let it go, let the water run out completely. Put on rubber gloves and use a sponge or towel to dry the water that has not yet drained from the water tank.

5. Remove the connected water pipe from the toilet and pour the excess water into the bucket. Connect the water tank to the toilet seat.

6. Remove the nut and the fixing bolt. Sometimes the bolts will turn, so use a hacksaw to cut the bolts. You can buy a single-handle saw, which is convenient for use in small work areas.

7. If your bathroom toilet seat is glued to the floor with caulking glue, please use a utility knife to cut the sealant.

8. Gently shake the toilet, remove the sealant stuck to the bottom of the toilet, and place the removed old toilet where it will not interfere with work.

9. Plug the drainpipe with a cloth to prevent the gas from the sewer from escaping. Finally, use a putty knife to scrape off the old sealant on the flange and the floor.

(1) When the bathroom toilet is removed or replaced, the water pipe of the toilet must be waterproofed, because the original waterproof layer is likely to be damaged when the old toilet is removed. Therefore, if you want to replace the toilet with a new one, you must make a waterproof layer again.

(2) Before removing the toilet, first determine the specific type of drain pipe under the toilet to avoid buying the wrong new toilet.

If you encounter some troubles in the process of removing the toilet, it is better to ask for the help of professional staff. If you want to know more information and knowledge about the toilet after reading the above, you can get a comprehensive solution by contacting us. The toilets we design and produce are easy to install and dismantle and are of excellent quality, which can meet the diverse needs of users.

As a professional manufacturer of toilets and accessories, we have accumulated rich experience in the design and production of this field. We have a strong R&D department and a strict quality management team, which can provide you with products with excellent performance. We can also provide thoughtful service and develop effective solutions according to your needs. If you want to buy our wall hung toilet, please contact us immediately!