The Common Reasons and Solutions of Toilet Blockage

The Common Reasons and Solutions of Toilet Blockage

Summary

The clogging of the toilet is a problem we often encounter in our daily life. This article will specifically introduce the common causes of toilet blockage and how to unblock it.

The Common Reasons and Solutions of Toilet Blockage
the common causes of toilet blockage and how to unblock it.

Toilet blockage is the most common problem in home life. We must first determine the cause of the toilet blockage, and then use a reasonable method to clear it, so that it will not affect our subsequent normal use. This article will specifically introduce the common causes of toilet blockage and how to unblock it.

Cause of blockage

1. Mistakes in toilet installation

Generally, it is because the water outlet at the bottom of the bathroom toilet is not aligned with the drain or the screw hole at the bottom of the toilet is completely sealed, which will cause the water level of the toilet tank to be not high enough to affect the flushing effect and cause the toilet to be blocked.

2. The toilet is slightly blocked

It is usually due to toilet blockage caused by toilet paper or hair, which is also the cause of toilet blockage that is often encountered in daily life.

3. The toilet is aging and blocked

If the bathroom toilet is used for a long time, it will inevitably cause scale on the inner wall. In severe cases, it will block the vent of the toilet and cause the toilet to run slowly.

4. Hard objects in the toilet block

If you accidentally fall into hard objects such as plastic brushes, bottle caps, soap, combs, etc., it will block the toilet, and you may need to remove the toilet to take out the hard objects.

Dredge method

1. Iron wire

First, you can use iron wire or a broken clothes hanger to extend one end of them into the toilet drain pipe. When you encounter a foreign object, pull it out so that the hair or dirt will be entangled on the iron wire and pulled up by the belt.

2.Long Hose

It can be dredged with a long hose, one end is connected to the faucet, one end is inserted into the toilet drain, and then the faucet is turned on and flushed with 4Mpa tap water pressure. But pay attention to the two ends of the hose must be fastened so that the water pressure can be higher.

3. Pipe dredging agent

You can buy a pipe dredging agent at the supermarket and mix it according to the manual ratio. Generally, it needs to be mixed with hot water and poured into the toilet, covered with the lid, and then squeeze the sewer with toilet plungers after half an hour to dredge.

4. Homemade solution

We can also make our own solution to clear the toilet. For example, after adding caustic soda to boiling water to dissolve it, pour it into the toilet, and the blockage can be cleared after 30 minutes. Or stir the baking soda and vinegar, add hot water to dissolve it, pour it into the toilet, and ferment for 10 minutes, which can not only remove the dirt on the inner wall of the toilet but also play a role in dredging.

5. Ask professionals to clear

Finally, if you try the above methods and the toilet is still clogged, it is recommended to call a professional dredging company and ask the staff to clear it.

We can’t throw some foreign objects directly into the toilet when we usually use them, which will greatly increase the probability of blockage. If you want to know more information and knowledge about the toilet after reading the above content, you can get a comprehensive solution by contacting us.

With excellent R&D technology and thoughtful product services, we have quickly become one of the leading toilet and accessories manufacturers. We have an experienced production team and a strict quality inspection system, which can control the quality of our products in an all-round way. At the same time, according to the diverse needs of customers, we can improve different types of products and considerate customized services. If you want to buy our high-quality toilet, please contact us immediately!